Login
RCwithAdam/FOKOOS Odin-5: Cura Profile

You're signing up to receive emails from RCwithAdam.

  • Free email delivery

FOKOOS Odin-5: Cura Profile

These Cura slicer settings have resulted in the best prints (so far) from the Odin-5.

This profile is intended for PLA filament. Adjust the temperature (and any other settings) to suit your particular filament.
If you want to print with flexible materials; decreasing the print speed, increasing the brim, and possibly increasing the flow rate, will help. 


CAUTION: Results may vary depending on several factors such as firmware versions, filament type, your specific printer, humidity, etc.

This profile was developed using 3D-Fuel Pro PLA, Odin-5 firmware version 1.0.2, and in a climate controlled room at ~72℉.

You're signing up to receive emails from RCwithAdam.


































DOWNLOAD HERE⬇ (Latest version has higher #)

AT.Odin5.PLA.BestAllAround(#11).curaprofile
  • 2.49 KB
AT.Odin5.PLA.BestAllAround(#10).curaprofile
  • 2.46 KB

INSTRUCTIONS:

  1. Click "Get Access" to download the Cura profile (above ☝️)
  2. On your computer, open your Cura slicer software (if you don't have  Cura already, get it here)
  3. In the Cura menu bar (usually at the top of the screen) click "preferences"
  4. Select "profiles"
  5. Select "import"
  6. From the import screen, select this ".curaprofile" file, and click "open"
  7. This profile should now show up in the list of profiles
  8. Close the Profile Manager window
  9. In the main Cura screen, select this profile from the "print settings" drop down menu
  10. Adjust any settings as needed. All done!